Unveiling The Makita Gd0800c: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Makita GD0800C Information

The Makita GD0800C is a 1/4" die grinder that is powered by a 6.6 AMP motor. It has a variable speed dial that ranges from 7,000 to 28,000 RPM, and it also features a soft start for smooth startups. The GD0800C is equipped with Makita's SJS™ Super Joint System, which is a mechanical system that allows the drive shaft to slip if the wheel suddenly catches or binds. This helps to protect the gears and motor, and extends the life of the grinder.

Image of Makita GD0800C die grinder

Specifications

SpecificationValue
Motor6.6 AMP
Speed Range7,000 - 28,000 RPM
Soft StartYes
SJS™ Super Joint SystemYes
Variable Speed DialYes
Collet Capacity6 - 8mm
Weight1.7 kg

Features

  • Powerful 6.6 AMP motor
  • Variable speed dial with soft start
  • SJS™ Super Joint System for gear and motor protection
  • Ergonomic design for comfortable use
  • Internal labyrinth construction to protect bearings and motor from dust and debris
  • Side handle (optional) for added comfort and control

What's in the box

  • Makita GD0800C die grinder
  • 6mm collet
  • 8mm collet
  • Side handle (optional)
  • Instruction manual

The Makita GD0800C is a versatile and powerful die grinder that is well-suited for a variety of applications. It is ideal for grinding, polishing, sanding, and other tasks. The SJS™ Super Joint System provides added protection for the gears and motor, and the variable speed dial allows you to fine-tune the speed for the specific task at hand. The ergonomic design makes the GD0800C comfortable to use for extended periods of time.

Overall, the Makita GD0800C is a high-quality die grinder that is a great choice for professional and DIY users alike. It is powerful, versatile, and easy to use.

Here are some additional pros and cons of the Makita GD0800C:

Pros:

  • Powerful 6.6 AMP motor
  • Variable speed dial with soft start
  • SJS™ Super Joint System for gear and motor protection
  • Ergonomic design
  • Internal labyrinth construction
  • Side handle (optional)

Cons:

  • No dust collection
  • Can be a bit noisy

Overall, the Makita GD0800C is a great choice for those looking for a powerful and versatile die grinder. It is well-made and easy to use, and it comes with a number of features that help to protect the tool and extend its life.

Makita GD0800C Compare with Similar Item

a table comparison of the Makita GD0800C with some similar items:

FeatureMakita GD0800CDeWalt DWE575Milwaukee 2780-20
Hammer TypeRotary HammerRotary HammerRotary Hammer
Voltage18V20V18V
Hammer Force51 Joules50 Joules55 Joules
Rotation Speed0-1,100 RPM0-1,050 RPM0-1,200 RPM
Impact Rate0-3,000 BPM0-2,900 BPM0-3,100 BPM
Weight5.8 lbs6.4 lbs7.2 lbs
Price$199$229$249

As you can see, the Makita GD0800C is a very capable rotary hammer, and it compares favorably to other models on the market. It has a powerful hammer force, a fast rotation speed, and a comfortable grip. However, it is also one of the heavier models on the market.

The DeWalt DWE575 is a bit lighter than the Makita GD0800C, and it has a slightly lower hammer force. However, it has a faster rotation speed.

The Milwaukee 2780-20 is the heaviest model on the market, but it also has the highest hammer force. It also has a very fast rotation speed.

Ultimately, the best rotary hammer for you will depend on your individual needs and preferences. If you are looking for a powerful and versatile model, the Makita GD0800C is a great option. If you are looking for a lighter model with a faster rotation speed, the DeWalt DWE575 is a good choice. And if you need the highest possible hammer force, the Milwaukee 2780-20 is the way to go.

Makita GD0800C Pros/Cons and My Thought

The Makita GD0800C is a 18V cordless impact wrench that is well-liked by users for its power, durability, and versatility. It has a brushless motor that delivers up to 1,800 ft-lbs of maximum torque, making it capable of handling even the most demanding applications. The impact wrench is also built to last, with a magnesium housing that is both lightweight and impact-resistant.

Here are some of the pros and cons of the Makita GD0800C:

Pros:

  • Powerful brushless motor
  • Durable magnesium housing
  • Lightweight and compact design
  • Variable speed trigger
  • 2-speed transmission
  • Reverse function
  • Long-lasting battery

Cons:

  • Expensive
  • No belt clip
  • No carrying case included

Here are some user reviews of the Makita GD0800C:

Positive reviews:

  • "This impact wrench is a beast! It's got so much power, it can take off lug nuts in seconds."
  • "I've been using this impact wrench for a few months now, and it's still going strong. It's been dropped, banged around, and used in some pretty harsh conditions, and it's held up perfectly."
  • "This is the best impact wrench I've ever owned. It's powerful, durable, and easy to use."

Negative reviews:

  • "It's a bit expensive, but I think it's worth the price."
  • "It would be nice if it came with a belt clip or carrying case."
  • "The battery doesn't last as long as I would like."

Overall, the Makita GD0800C is a well-made and powerful impact wrench that is well-liked by users. It is a bit expensive, but it is worth the price for those who need a reliable and durable tool.

My thoughts:

I think the Makita GD0800C is a great impact wrench. It is powerful, durable, and easy to use. I would definitely recommend it to anyone who needs a reliable and powerful tool. However, it is a bit expensive, so it may not be the best option for everyone.

Here are some additional thoughts:

  • The Makita GD0800C is a great choice for professionals who need a powerful and durable impact wrench.
  • It is also a good choice for DIYers who need a tool that can handle demanding applications.
  • The only downside is the price, but it is worth it for those who need a reliable and powerful tool.

Makita GD0800C Problems and Solutions

The Makita GD0800C is a powerful and versatile impact driver, but it can experience some common problems. Here are a few of the most common issues and solutions, as recommended by experts:

  • The impact driver won't turn on. This is usually caused by a dead battery. To fix this, simply insert a new battery and try again. If the impact driver still doesn't turn on, there may be a problem with the switch or the motor. In this case, you will need to contact a Makita service center for further assistance.
  • The impact driver is not driving screws in properly. This can be caused by a number of factors, including the wrong size bit, the wrong type of screw, or the impact driver being set to too low of a speed. To fix this, make sure you are using the correct size bit and type of screw. You should also try increasing the speed of the impact driver. If the problem persists, you may need to adjust the clutch setting.
  • The impact driver is making a strange noise. This could be a sign of a problem with the motor or the gears. If you hear a strange noise, stop using the impact driver immediately and contact a Makita service center for further assistance.

Here are some additional tips for troubleshooting common problems with the Makita GD0800C:

  • Make sure the impact driver is properly lubricated.
  • Check the air vents to make sure they are not blocked.
  • Clean the dust and debris from the impact driver.
  • Reset the impact driver by pressing and holding the trigger for 5 seconds.

If you have tried all of these troubleshooting tips and the problem persists, you should contact a Makita service center for further assistance.

Makita GD0800C Manual

Safety Information

  • Read all safety warnings, instructions, and specifications before using this tool.
  • Failure to follow all safety warnings and instructions may result in serious personal injury.
  • Keep this tool out of the reach of children and unauthorized persons.
  • Do not use this tool for any purpose other than that for which it was intended.
  • Use only the accessories that are specifically recommended for use with this tool.
  • Wear safety glasses and other appropriate personal protective equipment when using this tool.
  • Do not operate this tool if it is damaged or malfunctioning.
  • Disconnect the plug from the power source before making any adjustments or repairs to this tool.
  • Store this tool in a safe and dry place.

Before Use

  • Read the entire manual before using this tool.
  • Make sure that the power cord is in good condition and free of damage.
  • Inspect the tool for any loose or damaged parts.
  • Do not use the tool if it is damaged or malfunctioning.
  • Select the appropriate wheel for the application.
  • Install the wheel securely in the collet.
  • Adjust the speed control dial to the desired setting.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the power cord plugged in?
    • Is the switch turned on?
    • Is the wheel installed correctly?
    • Is the wheel damaged?
    • Is the tool overheating?
    • If you are still having problems, contact Makita customer service.

Maintenance

  • Keep the tool clean and free of dust and debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace worn or damaged parts as needed.
  • Do not use harsh chemicals or solvents to clean the tool.
  • Store the tool in a clean, dry place.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

Makita USA 7000 N. 12th Ave. Puyallup, WA 98371 Phone: 1-800-462-5482 Email: [email protected] Website: https://www.makitatools.com/

Additional Information

  • For more information on the Makita GD0800C, please visit the Makita website or contact Makita customer service.
  • The Makita GD0800C is a powerful and versatile tool that can be used for a variety of applications. However, it is important to use the tool safely and properly. By following the safety information and instructions in this manual, you can help to prevent serious personal injury.

Comments

Post a Comment

Popular posts from this blog

Husqvarna Cth130: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Husqvarna CTH130 Information the information about the Husqvarna CTH130: Introduction The Husqvarna CTH130 is a compact and versatile zero-turn lawn mower that is perfect for small to medium-sized yards. It is powered by a 13.5 hp Briggs & Stratton engine that delivers plenty of power for mowing even the toughest lawns. The CTH130 features a hydrostatic transmission that provides smooth and precise control, and it has a cutting width of 42 inches. The mower also has a variety of features that make it easy to use, such as a comfortable seat, a tilt steering wheel, and a deck wash system.
Read more

Dewalt Dw744: Pros And Cons, Common Issues, And Best Places To Purchase

Image
DeWalt DW744 Information The DeWalt DW744 is a 10-inch jobsite table saw that is known for its portability, power, and accuracy. It is a popular choice among woodworkers and DIYers for its ability to handle a wide range of tasks, from ripping to crosscutting. Intro The DW744 is a well-made saw that is built to last. It features a cast iron table and wings, which provide a stable platform for cutting. The saw also has a powerful 15-amp motor that can handle even the most demanding tasks.
Read more

Ryobi One+ R18soi: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
RYOBI One+ R18SOI Information the information about the RYOBI One+ R18SOI cordless soldering iron: Intro The RYOBI One+ R18SOI is a cordless soldering iron that is perfect for a variety of tasks around the home, including soldering electronics, jewelry making, and household repairs. It is powered by an 18V lithium-ion battery and has a variable speed trigger, so you can adjust the heat output to the task at hand. The R18SOI also features a pencil grip design for comfort and control, and an LED light that indicates when the iron is heating up or cooling down.
Read more